|
|
|
|
|
|
|
D/F Robotic Water-Cooled-to-the-Tip Machine Barrels |
 5" Standard W/C-Tip "MIG" Barrel Instruction Manual 534 8" Standard W/C-Tip "MIG" Barrel Instruction Manual 600  5" A Size W/C-Tip "MIG" Barrel Instruction Manual 534 8" A Size W/C-Tip "MIG" Barrel Instruction Manual 600 |
The fully Water-Cooled-to-the-Tip Models NCM-W/C-T & HTM-W/C-T Machine Barrels are applied to a Remote Mount DOCKING SPOOL. The D/F Machine Robotic Water-Cooled-to-the-Tip Barrels are designed to provide long trouble-free service. With the various models available, a selection may be made to suit individual requirements. The Remote Mount fully Water-Cooled-to-the-Tip DOCKING SPOOL® accommodates two (2) Water Cooled Nozzle Assemblies. This arrangement is readily adaptable to Dedicated or Automatic Welding applications. The equipment consists of four (4) basic components: a utility station, an intermediate utilities combination assembly, a High Deposition (H.D.) DOCKING SPOOL®, and a Water Cooled Nozzle. The H.D. DOCKING SPOOL® is the principal component in this welding equipment arrangement. It accepts the utilities at the top end of the Spool and provides a means of accepting the water cooled nozzle at the lower end. Several features important to a welding system are provided. Incorporated within the water channels of the DOCKING SPOOL® are check valves which provide a means of retaining residual water in the lines when the nozzle assembly is removed from the DOCKING SPOOL®. In addition a POSIT® Ring is provided at the upper end of the DOCKING SPOOL® which allows positive location in a Mounting Bracket to maintain dimensional stability. These welding assemblies are designated by Models. The Model NCM has a current capacity 750 amperes in argon shielding. These accommodate slip-in current tips fastened by a collet action nut. The wire diameter range with hard wire is .030"-.062" , cored wire .035"-1/8", and aluminum wire range of .035"-3/32". The Model HTM has a current capacity range of 850 amperes. Rating will be contingent on the combination of current tip and shielding gas to be used. The Model HTM employs threaded current tips and will accommodate .030” - 1/16” hard wire, .035” - 7/64” cored wire and 3/64” - 3/32” aluminum wires. MODEL EXPLANATION NCM-W/C-T - Heavy Duty, Collet Action (Slip-in Tip) Machine Barrel HTM-W/C-T - Heavy Duty, Threaded Tip Machine Barrel
Ordering Information - Complete Assemblies 
The fully Water-Cooled-to-the-Tip Models NCM-W/C-T & HTM-W/C-T Series A Direct Mount or Remote Mount Machine Barrels offer the same features as those described for the Machine Barrels Above. With the capability of providing larger I.D. gas nozzles and by their design offering a steady, smooth, non-turbulent gas flow for high volume production welding of a repetitive nature. MODEL EXPLANATION NCM-W/C-T Series A - Heavy Duty, Collet Action (Slip-in Tip) Machine Barrel (A) High Capacity Nozzle HTM-W/C-T Series A - Heavy Duty, Threaded Tip Machine Barrel (A) High Capacity Nozzle
Ordering Information - Complete Assemblies
|
