Wire Feeder Adapters
16557 Wire Feeder Adapter

View Your Remote Mount Feeder Adapter:

16880 Wire Feeder Adapter

View Your Direct Mount Feeder Adapter:

Overview Ordering More Info

Overview

Each D/F MIG (GMAW) torch head is fully assembled and ready to install. In order to make the installation complete, the code number, wire size, make/model (Lincoln wire feeders, Miller wire feeders, Thermadyne (Tweco, Thermal Arc), ESAB/Linde wire feeders, and power sources), and inlet as needed must be specified when ordering. D/F has a full line of wire feeder adapters that allow its MIG torches to be connected to Lincoln Electric NA3, NA4, NA5, NA-5R, Power Feed 10, Power Feed 84, LF72, LF74 Automatic wire feeders, Miller series power pins, ESAB, Euro, Tweco, Mavrix and Welding Alloys wire feeders, & all other wire feeders and power sources. If special welding tools or accessories other than those listed previously are required, please consult with the factory. Get the right wire feeder adapter connection to fit your MIG wire feeder.

Listed on the More Info tab are the different wire feeders D/F Machine Specialties Torches can connect to by the use of D/F's feeder adapters. Feeder adapter connections not listed here can often be addressed by the wide variety of available D/F Machine Specialties feeder adapter kits. If you cannot find the feeder connection you need to connect the D/F Machine Specialties torches you can click here to download our catalog of older Feeder Adapters, or you can contact our Technical Service Department at the factory by email or by phone (507) 625-6200 for more information.

Ordering Information

MANUFACTURER MODELS WIRE DIAMETER REMOTE MOUNT DIRECT MOUNT
HARD/AL CORED STUB LINER* HARD/AL CORED
Linde® ESAB® EH10, MIG-35 .030"-3/32" H/C/AL 13043 * 13080
5/64"-1/8" H/C 13052 * 13079
Linde® "BIG MIG" 13082
ESAB® D20 (20mm) .030"-3/32" H/C/AL 13098 * 13096
5/64"-1/8" H/C 13099 * 13097
18246 18247 18248 18249
EURO 18493 18493 18540 18540
Hobart® All Models .030"-3/32" H/C/AL 13067 * 13068
5/64"-1/8" H/C 16087 * 16225
Jetline® All Models .030"-3/32" H/C/AL 16557 * 16559
5/64"-1/8" H/C 16558 * 16560
Lincoln® LN-7, LN-8,NA-5R .030"-3/32" H/C/AL 13110 * 13113
5/64"-1/8" H/C 13112 * 13116
LN-9 .030"-3/32" H/C/AL 16581 * 16528
5/64"-1/8" H/C 16582 * 16529
NA3, NA4, NA5 .030"-3/32" H/C/AL 16879 * 16880
5/64"-1/8" H/C 16878 * 16881
Power Feed 10,
Power Feed 84,
LF72, LF74, Tweco #4
.030"-3/32" H/C/AL 13479 * 13480
5/64"-1/8" H/C 13469 * 13468
4R220 .030"-3/32" H/C/AL 13462 * 13464
5/64"-1/8" H/C 13463 13465
Lincoln® "BIG MIG" NA3, NA4, NA5 .030"-1/8" 16879 16878 Specify 16888 16888
Mavrix® PA-10 .030"-3/32" H/C/AL 16556 Requires Inlet
5/64"-1/8" H/C 16558
Miller® All Models,
Tweco #5
.030"-3/32" H/C/AL 16557 * 16558
5/64"-1/8" H/C 16559 * 16560
Miller® "BIG MIG" .030"-1/8" 13139
OTC® Requires insert .030"-1/8" 18268 * 18275
CMRE-741 .030"-3/32" H/C/AL 18282 18282
CMXL-231U,
DP-400, DP-500,
Tweco #4
.030"-3/32" H/C/AL 13479 * 13480
5/64"-1/8" H/C 13469 * 13468
DP-400, DP-500,
Tweco #5
.030"-3/32" H/C/AL 16557 * 16558
5/64"-1/8" H/C 16559 * 16560
Panasonic® PME-12X
YW50AKW1
13090 Requires Inlet 13092
13466
Themal Arc®
TWECO®
Tweco #4 .030"-3/32" H/C/AL 13479 * 13480
5/64"-1/8" H/C 13469 * 13468
Welding Alloys® .030"-3/32" H/C/AL Requires Liner,
Requires Inlet
13486 13486
5/64"-1/8" H/C
*Stub liners only required in feeder adapter when single piece casing is used.

D/F Wire Feeder Adapters - Supported Feeder Models

Miller® Wire Feeders: All models including 10 Series, 10A, 10E, 22 Series, 30 Series, 30A, 30B, 30E, 50 Series, 60 Series, 70 Series, 70A, 80 Series, 80A, MM10A, XRA, 60M, Cricket, Cricket XL, D-60, D-62, D-64, Millermatic 35, Millermatic 90, 120, 130, 140, 150, 180, 200, 211, 212, 250, 252, Millermatic 350P, MM-35, Spoolmatic 150, 130, 135, 150, 175, 185, 210, 250, 250MP, 90, Vintage; R-115, S-21E, S-22A, S-22P-12, S-22P8, S-300 Series (S-325), S-32P, S-32P-12, S-32P-8, S-32S, S-32SL, S-42GL, S-44GL, S-50 Series, S-52A, S-52E, S-54E, S-54A, S-52D, S-54D, D-52D, S-60 Series, S-70 Series, Sidekick, Sidekick XL, Intellimatic, Sidekick, D-51A, New Automatic 1, PortoMIG, Swing Arc-Dual, Swing Arc-Single, Suitcase Feeders, Invision, Deltaweld

Lincoln® Wire Feeders: Power Feed 10, Power Feed 84, SP250, SP253, LN-22, LN-23-P, LN-25, LN-7 (2 & 4 Drive), LN-742, LN-742H, LN-8, LN-9, LN-9 GMA, Synergic 7, Autodrive 4R90, 4R100, 4R220

OTC® Wire Feeders: Most models, including CM-145, CM-146, CM-147, CM-231, CM-747, CMRE-741, DynaAuto

Linde/ESAB® Euro Wire Feeders: All Models, Omni Mig, OMNI-MIG160, OMNI-MIG325, SP250, SP253

Linde®/ESAB®/L-TEC® Wire Feeders: ME-2, MigMaster 180, DigiMIG Dual, DigiPlus, DigiPulse, Dip/Stick 160, DipPak 250, DipPak 300, Med 20, Med 40, MIGhty, MIGhty 4HD, MIGhty V, Universal V, MIG 2E, MIG 4HD, MigMaster 250, MigMaster 300L, MIG-35, A10, Smash Weld-180, MEC 30/44, Miggy 125, Optimatic 30/44, EH-8, MIG-32, 160, V160, 3IN1, L-TEC 225, EH1, EH5, EH10, EH11, SHE-4, SHE-5, VAM2, L-TEC 35, MIG35, SEH4/5

Hobart® Wire Feeders: Hobart Dual, 17, IronMan 210, IronMan 250, 27, 27A, Dualmatic 27/70, H3S, H4S, H6S, 44, 70, 70S, SP100

Linde® Wire Feeders: All Models including SWM11, SWM11B, SWM12, SWM13, SWM14, SWM20, SWM22, SWM23, SWM24, SWM25, SWM26, SWM31, SWM32, SWM34, SWM35, SWM37, SWM38, EH8, MM253

Mavrix® Wire Feeders: All Models

OXO® Wire Feeders: AVC-8Q, AVC-30Q

Panasonic® Wire Feeders: All Models

TWECO® (Thermadyne®, Thermal Arc®) Wire Feeders: Feeders adapted to TWECO® style 3/4 dia power pin, MultiMaster 260, DuraDrive 4-30, DuraDrive 4-48, CMUS-511, PowerMig 255 and 300, SP85, SP100, SP100T, SP125T, SP130T, SP160, SP170, SP170T, MigPak 10 and 55, WeldPak 100, Wirematic 250 and 255, Model 17, Digital 2000, Digital 2200 series, Migit 17, 2410, Beta-Mig 250, BetaMig 251, Dual-Digital, Handler 120, HMC-140, PortaFeed 1000, Pro Feed 412, Ultra Feed 1000, Beta-Mig 170, Handler 150, HMC-410, PortaFeed 17, Ultra-Feed 1000, Porta-Wire CC/CV, Tweco #4, 210GM, 250GM, Dual Digital 2000, TAF-2, TAF-4

Fronius® Wire Feeders: * Feeder manufacturer offers different gun receiver bushings that will change the direct plug required; Miller, Tweco, Euro, Etc.

Welding Alloys® Wire Feeders: 4-Wheel Drive Wire Feed System

Airco® Wire Feeders: AHF-E1, AHF-G, AHF-L1, AHF-T, AHF-SAHF-T, AHF-N, AHF-R, AHF-R1, AHF-U, AHF-U1, AHF-V, AHF-V1, AHF-V6, AHF-NP, AHF-N6, System I, System II, Wire Guide, Mobilmatic, Little Dipper, Dipstick-160, DIP-PAC-200, DIP-COR-300

Compak-O-Matic® Wire Feeders: 480, 120, 125, No. 75

Jetline® Wire Feeders: CWF-20C, CWF-23, CWF-23E CWF-50, HWP-50E

Inlet Guides
13810 Inlet

View Your Inlet:

Overview

Overview

Ordering Information

WIRE SIZE STEEL
CODE NO.
BRASS
CODE NO.
NYLON
CODE NO.
.030" 13801 16417 -
.035" 13803 16418 -
.045" 13806 16419 -
.052" 13844 16420 -
1/16" 13809 16421 -
5/64" 13812 16422 -
3/32" 13814 16422 -
7/64" 13816 - -
1/8" 13842 - -
3/64" AL - - 13807 Red
1/16" AL - - 13810 White
3/32" AL - - 13815 Blue
1/8" AL - - 13843 Orange
Inlet Guides ("BIG MIG")
BIG MIG Inlet

13818 - Blue "BIG MIG" Inlet

Overview

Overview

Ordering Information

WIRE SIZE ALUMINUM
CODE NO.
STEEL
CODE NO.
1/16" 13817 White -
5/64" - -
3/32" 13818 Blue -
7/64" - 13826
1/8" 13819 Yellow 13827
5/32" 13820 Brown 13828
3/16" 13821 Green 13829
7/32" 13822 Orange 13830
1/4" 13823 Black -
5/16" 13824 Purple -
3/8" 13825 Pink -